2010 Porsche 911 (first used 2010) MOT pass rate, common failures & what to check

In 2025, 90.5% of Porsche 911s first used in 2010 passed their MOT first time, against 59.3% for all cars first used in 2010. Across 5,195 911 first tests from 2023 to 2025, the most common failure areas were lamps and electrical equipment, tyres and body, chassis and structure.

This page analyses first MOT tests for Porsche 911s first used in 2010 (all trims grouped): 2021 to 2025 for the pass-rate trend, and 2023 to 2025 for the failure and advisory analysis — plus what is worth checking before you buy one.

Data: DVSA anonymised MOT tests to December 2025 · Calculated by SortedCars · Updated October 2026

Passed first time, 2025
90.5%
of 1,732 first tests; all cars first used in 2010: 59.3%. Fixed-at-the-test counts as a fail
Tests analysed
5,195
first tests, 2023–2025; 1,732 in 2025
Clean pass, 2025
68.8%
of 1,732 first tests in 2025, passed with no advisory and no minor defect recorded
Typical mileage, tested in 2025
49,500
middle half: 33,000–67,000 miles; all cars first used in 2010: 100,000

How the 2010 Porsche 911 MOT pass rate has changed

Share of first tests passed in each year, 911s first used in 2010 against all cars first used in 2010 (any make or fuel; not adjusted for mileage, fuel or use). In 2025 the 911 figure was 31.2 points higher.

2010 911All cars first used in 2010
50%60%70%80%90%100%20212022202320242025Test year (first tests)All cars first used in 2010, test year 2021: 62.6%All cars first used in 2010, test year 2022: 61.7%All cars first used in 2010, test year 2023: 60.5%All cars first used in 2010, test year 2024: 59.6%All cars first used in 2010, test year 2025: 59.3%2010 911, test year 2021: 91.2%2010 911, test year 2022: 90.6%2010 911, test year 2023: 91.3%2010 911, test year 2024: 89.9%2010 911, test year 2025: 90.5%90.5%59.3%
View this chart as a table
Test year2010 911All cars first used 2010911 first tests
202191.2%62.6%1,757
202290.6%61.7%1,760
202391.3%60.5%1,743
202489.9%59.6%1,720
202590.5%59.3%1,732

Common 2010 Porsche 911 MOT failures

Share of the 489 failed first tests (2023–2025) with at least one failure in each area. A test can fail in more than one area, so the shares add up to more than 100%.

Lamps, reflectors and electrical equipment30.3%
Tyres24.1%
Body, chassis, structure17.6%
Suspension12.5%
Visibility11.7%
Brakes10.8%
Noise, emissions and leaks7.6%

Most common failure items

DVSA failure itemShare of failed first testsTests
Drive shaft joints: constant velocity boot split or insecure, no longer prevents the ingress of dirt16.2%79
Headlamp aim: too high11.7%57

Item names are DVSA’s own wording. 2023–2025 combined.

What to check on a 2010 Porsche 911 before buying

The three areas where failed first tests most often had a fault, 2023–2025.

  1. Lamps and electrics. Ask someone to watch while you work the brake lights, indicators, sidelights, dipped and main beam, and the number-plate lamps.
  2. Tyres. Worth checking the tread depth across the whole width of each tyre, and the sidewalls for cuts, cracks and bulges.
  3. Body and underside. Worth looking underneath with a torch at the sills, floor and mountings for corrosion, and at the rubber boots on the drive shafts for splits.

Common 2010 Porsche 911 MOT advisories

Advisories are points the tester noted that did not fail the car. Most common on 2010 911s, as a share of all 5,195 first tests, 2023–2025.

DVSA advisory itemShare of first testsTests
Tread depth: worn close to legal limit/worn on edge7.8%405
Rigid brake pipes: corroded, covered in grease or other material5.0%261
Brake discs: worn, pitted or scored, but not seriously weakened4.8%251
Tyre condition: slightly damaged/cracking or perishing3.9%204
Ball joint: has slight play2.2%116

Questions about the 2010 Porsche 911 MOT

What is the MOT pass rate of a 2010 Porsche 911?

In 2025, 90.5% of 911s first used in 2010 passed their MOT first time, against 59.3% for all cars first used in 2010. A car fixed during the test counts as a fail.

What does a 2010 911 most often fail its MOT on?

Lamps and electrical equipment (in 30.3% of failed first tests, 2023–2025), tyres (24.1%) and body, chassis and structure (17.6%). The single most common item was “Drive shaft joints: constant velocity boot split or insecure, no longer prevents the ingress of dirt” (16.2%).

How often does a 2010 Porsche 911 fail its MOT?

In 2025, 9.5% of first tests on 911s first used in 2010 did not pass first time: 8.3% failed, and a further 1.3% had a fault fixed during the test (counted as a fail here). Across 2023–2025, 489 of 5,195 first tests did not pass first time.

What are the most common 2010 Porsche 911 MOT advisories?

“Tread depth: worn close to legal limit/worn on edge” (on 7.8% of first tests, 2023–2025), “Rigid brake pipes: corroded, covered in grease or other material” (5.0%), “Brake discs: worn, pitted or scored, but not seriously weakened” (4.8%), “Tyre condition: slightly damaged/cracking or perishing” (3.9%) and “Ball joint: has slight play” (2.2%).

Is a 2010 Porsche 911 reliable?

An MOT pass rate shows what failed at the test, not how reliable a car is. For this group of cars the first-time pass rate went from 91.2% in 2021 to 90.5% in 2025. For one particular car, its own MOT history matters more than the average.

Other cars first used in 2010

The most-tested cars from the same year. Each page uses the same method.

2010 Ford Fiesta MOT statistics · 2010 Ford Focus MOT statistics · 2010 Vauxhall Corsa MOT statistics · 2010 Vauxhall Astra MOT statistics · 2010 Volkswagen Golf MOT statistics

How the 2010 Porsche 911 MOT data is calculated

Every number on this page is calculated by SortedCars from DVSA’s anonymised MOT test data for Great Britain, 2021–2025. “2010 911” means a Porsche 911 whose date of first use falls in 2010 (59, 10 and 60 plates), all trims grouped. Class 4 vehicles, first tests only — retests are not counted. Pass rate = passed ÷ all first tests; a car with a fault fixed during the test (PRS) counts as a fail. Our national first-test pass rate matches DVSA’s published figure (table DVSA/MOT/01) to within 0.04 points in every year. Clean pass = passed with no advisory and no minor defect recorded. Mileage is the reading recorded at the test. Comparisons are with all cars first used in 2010, any make or fuel, and are not adjusted for mileage, fuel or use. Failure and advisory item names are DVSA’s own wording. No figure is shown for fewer than 500 tests; an item is shown only if it appears on at least 50 tests and 1% of the base. Pass rates describe a group of cars, not one car: a well-kept example can pass and a neglected one can fail. This page is general information, not advice about any particular vehicle; always have a used car inspected before you buy. SortedCars is not affiliated with or endorsed by DVSA. You can check any car’s MOT history free on the official service: gov.uk/check-mot-history. Contains public sector information licensed under the Open Government Licence v3.0.